It was completely disassembled cleaned and lubed before re-assembly. All the needle bearings (shaft and thrust) have been cleaned and lubed. The 2 ball bearing have been replaced with NEW sealed ball bearings.
It has lightly used ignition points with 32 ounce spring and a used condenser. (SEE PHOTOS of spring gauge). The cap is also used but the rotor is NEW. I set this distributor up on my distributor machine. Dwell is set at 34° and centrifugal advance is set at 12° distributor which is 24° at the crank.
The exposed aluminum surface has been coated with "Sharkhide" to protect the aluminum. See last photo for "sharkhide" info.